MAX4053ACEE-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Number of Bits | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4053ACEE-T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SSOP (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. Totally, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPDT switching circuits. The multiplexer consists of 3 circuits. Try searching for the analog switch ic with MAX4053 if you are looking for variants. There is a standard Multiplexer or Switches analogue multiplexer here. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Additional features of the electronic component include: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY. It conducts in a 8-bit manner.
MAX4053ACEE-T Features
1 Channels
Switch Circuit: SPDT
Additional Features: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY
8-Bit
MAX4053ACEE-T Applications
There are a lot of Maxim Integrated MAX4053ACEE-T Analog Switches & Multiplexers ICs applications.
- DVD-R
- Sample hold systems
- DSLAMs
- Cell phones
- Sample-and-hold systems
- Audio and video switching
- PDH Multiplexers
- Digital Cross-Connects
- SDH/SONET multiplexers
- Automatic test equipment
