MAX4053ACPE

175ns, 150ns SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4053 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4053ACPE
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 192
Description: 175ns, 150ns SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4053 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Max Power Dissipation	640mW
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4053
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	8V
Number of Channels	1
Number of Circuits	3
Max Supply Voltage	16V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	100nA
Max Supply Current	100nA
Number of Bits	8
Turn On Delay Time	175 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	6 Ω (Max)
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4053ACPE Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around 0°C~70°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. A SPDT switching circuit is used to build these analog multiplexers. This multiplexer is composed of 3 circuits. Try searching with MAX4053 to find analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 16V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. This digital switch can be operated with a current of 1μA. The analogue multiplexer may be damaged if voltage is greater than 100nA. There is no problem with using dual supply voltage, but it should not exceed 8V. For dual power supplies, a voltage of at least 2.7V should be attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. 8V operating voltages can be used with this electrical part. It can conduct 8-bit signals.