MAX4053ACSE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Number of Bits | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4053ACSE Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Operational temperature extended around 0°C~70°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPDT switching circuit is used to build these analog multiplexers. This multiplexer is composed of 3 circuits. Try searching with MAX4053 if you're looking for variants. In this analog multiplexer, the value is Multiplexer or Switches. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. This electronic part has additional features, such as: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY. It can conduct in a 8-bit manner.
MAX4053ACSE Features
1 Channels
Switch Circuit: SPDT
Additional Features: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY
8-Bit
MAX4053ACSE Applications
There are a lot of Maxim Integrated MAX4053ACSE Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Automatic test equipment
- Signal routing between systems
- Mechanical reed relay replacement
- Voice over IP/DSL – Integrated Access Devices, Smart
- Digital cross connects (DSX-1)
- HDTV
- DSLAMs
- Communication systems
- PBX interfaces
