MAX4053AEEE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 8V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 100nA |
| Turn On Delay Time | 175 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4053AEEE Overview
This electronic part is conveniently packaged in 16-SSOP (0.154, 3.90mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. Circuits based on SPDT switching are used to construct these analog switch ics. A 3 circuit is present in this switch device. MAX4053 can be used to search for analog multiplexer variants. It has an internal resistance of 100Ohm. The datasheets for the 16 pins explain the functions. A voltage higher than 16V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1μA current would suffice. A voltage higher than 100nA may cause damage to the switch multiplexer. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. You should attach at least 2.7V voltage if you are using dual power supply. A voltage of 8V can be used to operate the electronic component.
MAX4053AEEE Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX4053AEEE Applications
There are a lot of Maxim Integrated MAX4053AEEE Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Precision data acquisition
- 65 V DACs
- Avionics
- Audio/video switches
- Medical
- PBX interfaces
- Audio signal routing
- New designs requiring multiplexer functions
- Battery Powered Systems
