MAX4053AEPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Additional Feature | IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Operating Supply Current | 1μA |
| Number of Bits | 8 |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 4.572mm |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4053AEPE Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 16 series. SPDT switching circuits are used in these analog switch ics. 3 circuits are used in this analogue multiplexer. Use MAX4053 to search for variants of the digital switches. A 100Ohm internal resistance characterizes this multiplexer. The digital multiplexer has a low cost Dual, Single supply. This multiplexer would work with 1μA current. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Don't miss this electronic component's additional features, such as: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY. Its conductivity is 8-bit.
MAX4053AEPE Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Additional Features: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY
8-Bit
MAX4053AEPE Applications
There are a lot of Maxim Integrated MAX4053AEPE Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Audio and video signal routing
- ISDN NT1/TA
- Optical Applications
- 65 V DACs
- SDH/SONET multiplexers
- Battery Powered Systems
- Multi-Line E1 Interface Cards
- Cross Connects
- Microwave transmission systems
