MAX4053AESE

175ns, 150ns SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4053 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4053AESE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 439
Description: 175ns, 150ns SPDT 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4053 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4053
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	3
Max Supply Voltage	16V
Min Supply Voltage	2V
Operating Supply Current	1μA
Max Supply Current	1μA
Number of Bits	8
Turn On Delay Time	175 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	6 Ω (Max)
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4053AESE Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An injection of 16 pins is performed into the body of the electrical component. A SPDT switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 3. Try searching with MAX4053 to find analog multiplexer variants. In this multiplexer, the internal resistance is 100Ohm. The functions of 16 pins can be found in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 1μA. The analogue multiplexer may be damaged if voltage is greater than 1μA. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 2.7V voltage attached. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It is able to conduct in a 8-bit way.