MAX4053CEE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Number of Bits | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 12 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4053CEE Overview
Due to its 16-SSOP (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPDT switching are used to construct these analog switch ics. This multiplexer is composed of 3 circuits. MAX4053 can be used to search for analog multiplexer variants. Theswitch device is a typical Multiplexer or Switches. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Additional features of the electronic component include: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY. 8-bits are supported.
MAX4053CEE Features
1 Channels
Switch Circuit: SPDT
Additional Features: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY
8-Bit
MAX4053CEE Applications
There are a lot of Maxim Integrated MAX4053CEE Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- Data Acquisition Systems
- Fault Tolerant Systems
- Industrial control systems
- DSLAMs
- DVD-R
- Automotive applications
- Routers
- E1 Multiplexer
