MAX4066ACEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 45Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4066 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 185 ns |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -86dB @ 1MHz |
| Switch-on Time-Max | 125ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2V~16V |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4066ACEE+ Overview
The electrical component comes in 16-SSOP (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around 0°C~70°C TA. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. The electrical component body receives 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. 4 circuits are used in this analogue multiplexer. Use MAX4066 to search for variants of the digital switches. A 45Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. Multiplexers should not be powered above 16V in normal situations. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. The analogue multiplexer could operate on 1μA current. This analog switch requires a voltage of 2V~16V to drain from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur.
MAX4066ACEE+ Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 100MHz
MAX4066ACEE+ Applications
There are a lot of Maxim Integrated MAX4066ACEE+ Analog Switches & Multiplexers ICs applications.
- Routers
- ISDN NT1/TA
- Audio and video routing
- Cross Connects
- Medical systems
- Remote wireless modules
- RGB switches
- High reliability control systems
- PBX interfaces
- Mechanical reed relay replacement
