MAX4066ACPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 45Ohm |
| Max Power Dissipation | 800mW |
| Base Part Number | MAX4066 |
| Number of Circuits | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 75 ns |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -86dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~16V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4066ACPD+ Overview
Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around 0°C~70°C TA. A SPST - NO switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 4. Try searching with MAX4066 if you're looking for variants. Analog switches have 45Ohm internal resistance. You can find the functions of the 14 pins in the datasheets. normally, users should not supply switches with voltages higher than 16V. The analog switch ic is of the Single supply type and is cost-effective. 2V is the lowest voltage the electrical component should receive. This analogue multiplexer requires a voltage of 2V~16V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA.
MAX4066ACPD+ Features
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MAX4066ACPD+ Applications
There are a lot of Maxim Integrated MAX4066ACPD+ Analog Switches & Multiplexers ICs applications.
- Cross Connects
- High speed data transmission line cards
- Fiber In The Loop (FITL)
- Private Branch Exchange (PBX)
- USB 1.1 signal switching circuits
- Automatic test equipment
- Audio and video switching
- Imaging
- Power routing
- High reliability control systems
