MAX4066ACPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/12V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -86dB @ 1MHz |
| Switch-on Time-Max | 125ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2V~16V |
| Normal Position | NO |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4066ACPD Overview
The electronic component is convenient to ship overseas because it is packed in a 14-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. In total, 14 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. A SPST - NO switching circuit is used for these analog switches. There are 4 circuits in this multiplexer. Using the MAX4066 search parameter, you can discover variants of the switch. It is a typical Multiplexer or Switches analog multiplexer. A voltage of 2V~16V is required to drain this analog switch from a single voltage supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4066ACPD Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MAX4066ACPD Applications
There are a lot of Maxim Integrated MAX4066ACPD Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Automatic test equipment
- Fiber In The Loop (FITL)
- Communication systems
- Communication systems
- Sample hold systems
- PCMCIA cards
- Medical systems
- Communications systems
- High speed data transmission line cards
