MAX4066ACSD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4066 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -86dB @ 1MHz |
| Switch-on Time-Max | 125ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2V~16V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
MAX4066ACSD+ Overview
Shipping overseas is convenient with the electronic component packed in 14-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. The operating temperature is extended to around 0°C~70°C TA. In total, there have been 14 terminations. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. There are 14 pins injected into the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. The multiplexer consists of 4 circuits. Using the MAX4066 search parameter, you can discover variants of the switch. Datasheets for functions of 14 pins are available. Draining from a single voltage supply, this analog switch requires a voltage of 2V~16V.
MAX4066ACSD+ Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MAX4066ACSD+ Applications
There are a lot of Maxim Integrated MAX4066ACSD+ Analog Switches & Multiplexers ICs applications.
- Video switching
- Remote wireless modules
- Digital access cross connects
- Microwave transmission systems
- Microprocessor Controlled Analog Systems
- Battery-powered systems
- Medical Instrumentation
- DSUs
- Frame Relay Equipment
- Mechanical reed relay replacement
