MAX4066ACSD

100ns, 75ns SPST - NO 45Ohm DUAL Analog Switches MAX4066 14 Pins 100pA 5V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4066ACSD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 987
Description: 100ns, 75ns SPST - NO 45Ohm DUAL Analog Switches MAX4066 14 Pins 100pA 5V 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1996
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	45Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4066
Output	SEPARATE OUTPUT
Pin Count	14
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	150 ns
Supply Type	Single
Turn-Off Delay Time	185 ns
-3db Bandwidth	100MHz
On-State Resistance (Max)	45Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	100ns, 75ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-86dB @ 1MHz
Switch-on Time-Max	125ns
Switch-off Time-Max	75ns
Voltage - Supply, Single (V+)	2V~16V
Normal Position	NO
Height	1.5mm
Length	8.75mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant

MAX4066ACSD Overview

Shipping overseas is convenient with the electronic component packed in 14-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around 0°C~70°C TA are extended for operation. The total number of terminations is 14. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component like this is included in the 14 series. A SPST - NO switching circuit is used for these analog switches. This multiplexer is composed of 4 circuits. If you are looking for variants of the digital switch, trying search with MAX4066. In this multiplexer, the internal resistance is 45Ohm. To find out what the 14 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. A voltage higher than 16V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. 2V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~16V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.