MAX4066CEE

100ns, 75ns SPST - NO 45Ohm DUAL Analog Switches MAX4066 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4066CEE
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 944
Description: 100ns, 75ns SPST - NO 45Ohm DUAL Analog Switches MAX4066 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Switch-off Time-Max	75ns
Voltage - Supply, Single (V+)	2V~16V
Normal Position	NO
Height Seated (Max)	1.75mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1996
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	45Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.635mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4066
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	150 ns
Supply Type	Single
Turn-Off Delay Time	185 ns
-3db Bandwidth	100MHz
On-State Resistance (Max)	45Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	100ns, 75ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-86dB @ 1MHz
Switch-on Time-Max	125ns

MAX4066CEE Overview

Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. SPST - NO switching circuits are used in these analog switch ics. The multiplexer consists of 4 circuits. Try searching for the analog switch ic with MAX4066 if you are looking for variants. Internally, this switch multiplexer has a resistance of 45Ohm. For details about the functions of 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 1μA. This analog switch requires a voltage of 2V~16V to drain from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.