MAX4069AUB+T
| Parameters | |
|---|---|
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Adjustable Threshold | YES |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 2.4μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~24V |
| Input Offset Voltage (Vos) | 80μV |
| Supply Current-Max (Isup) | 0.25mA |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| -3db Bandwidth | 100kHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 444.4mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4069 |
| Pin Count | 10 |
| Supply Voltage-Max (Vsup) | 24V |
| Power Supplies | 2.7/24V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
MAX4069AUB+T Overview
In the package, you will find a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. An op amp of this type is a Current Sense-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 10. The pins on this board total to 10 in total. Please take in mind that op amp should be run at 12V. To be specific, this instrumentation amplifier is a type of Other Analog ICs. An 10-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 80μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 100μA . It is a member of the 40dB's 40dB family. There are 1 circuits on this op amp. On the buffer amps, there are 1 channels that can be used. The other types of analog IC are as follwed POWER SUPPLY SUPPORT CIRCUIT.
MAX4069AUB+T Features
10 Pins
supply voltage of 12V
40dB voltage gain
MAX4069AUB+T Applications
There are a lot of Maxim Integrated MAX4069AUB+T Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Test equipment
- Comparator
- High/low-pass filter circuit
- High gain DC amplifier
- High input resistance broadband
- Non-polarized electrodes
- Digital cameras
- Cinema or auditorium audio system
- Band-pass filter
