MAX406AESA+

0.1pA 66 dB Instrumentational OP Amps 0.00005μA 2.5V~10V MAX406 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX406AESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 165
Description: 0.1pA 66 dB Instrumentational OP Amps 0.00005μA 2.5V~10V MAX406 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	-45°C~85°C
Packaging	Tube
Published	1997
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX406
Pin Count	8
JESD-30 Code	R-PDSO-G8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Circuits	1
Current - Supply	1μA
Slew Rate	0.005V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	0.1pA
Voltage - Supply, Single/Dual (±)	2.5V~10V
Gain Bandwidth Product	8kHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Unity Gain BW-Nom	40 kHz
Average Bias Current-Max (IIB)	0.00005μA
Low-Offset	NO
Frequency Compensation	YES AVCL>=2
Supply Voltage Limit-Max	6V
Voltage - Input Offset	750μV
Current - Output / Channel	600μA
Low-Bias	YES
Micropower	YES
Neg Supply Voltage-Max (Vsup)	-6V
Voltage Gain-Min	200000
Common-mode Reject Ratio-Min	70 dB
Length	4.9mm
RoHS Status	ROHS3 Compliant

MAX406AESA+ Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -45°C~85°C. In total, there are 1 circuits on this buffer amplifier. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There is a recommendation that this electrical part be used with a supply with 1μA current rating. A voltage gain of 200000 is the minimum this op amp can achieve.