MAX406BCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX406 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 1μA |
| Slew Rate | 0.005V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~10V |
| Bandwidth | 40 kHz |
| Gain Bandwidth Product | 8kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 40 kHz |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 750μV |
| Low-Bias | YES |
| Micropower | YES |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Common-mode Reject Ratio-Min | 54 dB |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| RoHS Status | ROHS3 Compliant |
MAX406BCPA+ Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . There are 1 circuits on op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. We recommend that you use this electronic part with an 1μA supply in order to get the best performance from it.
MAX406BCPA+ Features
8 Pins
supply voltage of 2.5V
Output Type: Rail-to-Rail
MAX406BCPA+ Applications
There are a lot of Maxim Integrated MAX406BCPA+ Instrumentational OP Amps applications.
- Mobile phone
- pH (acidity)
- High speed sample
- Non-polarized electrodes
- Proportional counter tubes
- Laptop
- Wireless base stations
- Band-pass filter
- Industrial applications including automation
- Power transmission
