MAX406BEPA

600μA per Channel 0.1pA 60 dB Instrumentational OP Amps 0.00005μA 5V 2.5V~10V MAX406 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX406BEPA
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 799
Description: 600μA per Channel 0.1pA 60 dB Instrumentational OP Amps 0.00005μA 5V 2.5V~10V MAX406 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1997
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX406
Pin Count	8
JESD-30 Code	R-PDIP-T8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Circuits	1
Operating Supply Current	1μA
Nominal Supply Current	1.2mA
Output Current	600μA
Slew Rate	0.005V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	0.1pA
Voltage - Supply, Single/Dual (±)	2.5V~10V
Output Current per Channel	600μA
Input Offset Voltage (Vos)	750μV
Gain Bandwidth Product	8kHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Unity Gain BW-Nom	40 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00005μA
Low-Offset	NO
Frequency Compensation	YES AVCL>=2
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	YES
Height Seated (Max)	4.572mm
Length	9.375mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX406BEPA Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. As far as the input offset voltage is concerned, linear amplifier rates at 750μV. This electronic part is best mounted with type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . As long as the supply current of the chip does not exceed 1μA, this op amp ic can operate. 120dB should be the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of instrumentation amplifier is rated 5V voltage.