MAX4070AUA-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 362mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4070 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 24V |
| Power Supplies | 3.6/24V |
| Supply Voltage-Min (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Adjustable Threshold | NO |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 2.4μA |
| Voltage - Supply, Single/Dual (±) | 3.6V~24V |
| Input Offset Voltage (Vos) | 80μV |
| Supply Current-Max (Isup) | 0.25mA |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| -3db Bandwidth | 100kHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4070AUA-T Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. An op amp of this type is a Current Sense-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 12V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOther Analog ICsed as a Other Analog ICs-type device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 80μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 100μA . 40dB should be the voltage gain. There are 1 circuits on this op amp. On the buffer amps, there are 1 channels that can be used. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the POWER SUPPLY SUPPORT CIRCUIT.
MAX4070AUA-T Features
8 Pins
supply voltage of 12V
40dB voltage gain
MAX4070AUA-T Applications
There are a lot of Maxim Integrated MAX4070AUA-T Instrumentational OP Amps applications.
- PDA
- Signal amplification
- Commercial audio systems
- Automotive sensors
- Band-stop filter
- E-book readers
- Ultrasound transducers
- Non-polarized electrodes
- Instrumentation
- High gain DC amplifier
