MAX4074BJEUK-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | GainAmp™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4074 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 37μA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Current - Input Bias | 0.8pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| -3db Bandwidth | 200kHz |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4074BJEUK-T Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. Buffer amplifier has a total of 5 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 5 pins are located on the operational amplifiers. Op amp rates 200μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~70°C . Using an 37μA supply current, this operational amplifier ics can be operated. In total, there are 1 circuits on this buffer amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 5V. Instrumentation amplifiers are numbered by their GainAmp? series.
MAX4074BJEUK-T Features
5 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
MAX4074BJEUK-T Applications
There are a lot of Maxim Integrated MAX4074BJEUK-T Instrumentational OP Amps applications.
- High gain DC amplifier
- earphone
- Proportional operation circuits
- Video amplifiers
- Addition operation circuits
- ECG equipment
- Exponential operation circuits
- E-book readers
- single/dual op amp sum and difference circuits
- Oscilloscopes
