MAX4080SASA-T

1 Channels 5μA 100 dB Instrumentational OP Amps 4.5V~76V MAX4080 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4080SASA-T
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 609
Description: 1 Channels 5μA 100 dB Instrumentational OP Amps 4.5V~76V MAX4080 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	471mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	48V
Base Part Number	MAX4080
Pin Count	8
Output Type	Voltage
Number of Channels	1
Operating Supply Current	75μA
Nominal Supply Current	75μA
Accuracy	0.1 %
Amplifier Type	Current Sense
Common Mode Rejection Ratio	100 dB
Current - Input Bias	5μA
Voltage - Supply, Single/Dual (±)	4.5V~76V
Input Offset Voltage (Vos)	100μV
Bandwidth	250 kHz
Gain Bandwidth Product	250 kHz
Unity Gain BW-Nom	250 kHz
Voltage Gain	35.56dB
Power Supply Rejection Ratio (PSRR)	100dB
Length	4.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX4080SASA-T Overview

In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are Current Sense types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 48V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 75μA , this buffer op amp will be able to operate. You should keep the voltage gain at 35.56dB for the time being. The op amp ic has 1 channels on it. One of its many advantages is that buffer op amp outputs Voltage signals.