MAX4080TAUA
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 362mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4080 |
| Pin Count | 8 |
| Output Type | Voltage |
| Supply Voltage-Max (Vsup) | 76V |
| Power Supplies | 4.5/76V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 75μA |
| Nominal Supply Current | 75μA |
| Max Supply Current | 190μA |
| Adjustable Threshold | YES |
| Accuracy | 0.1 % |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~76V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 250 kHz |
| Gain Bandwidth Product | 250 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4080TAUA Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Current Sense-type. Instrumentation amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 48V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Power Management Circuits device. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 75μA . Op amp is a member of the 26.02dB's 26.02dB family. There are 1 channels on the operational amplifiers. On the output type, there are Voltage different types of op amps. This linear amplifier also utiliPOWER SUPPLY SUPPORT CIRCUITes an analog IC known as a POWER SUPPLY SUPPORT CIRCUIT.
MAX4080TAUA Features
8 Pins
supply voltage of 48V
26.02dB voltage gain
Output Type: Voltage
MAX4080TAUA Applications
There are a lot of Maxim Integrated MAX4080TAUA Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Power generator
- Scintillation detectors
- Instrumentation
- Home audio systems
- High gain DC amplifier
- Weak signal detection
- Weighing systems
- single/dual op amp sum and difference circuits
- Exponential operation circuits
