MAX4081FASA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4081 |
| Pin Count | 8 |
| Output Type | Voltage |
| Number of Circuits | 1 |
| Operating Supply Current | 103μA |
| Nominal Supply Current | 103μA |
| Accuracy | 0.1 % |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~76V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 150 kHz |
| Gain Bandwidth Product | 150 kHz |
| Voltage Gain | 13.98dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4081FASA+T Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A Current Sense-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 103μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 13.98dB is the best course of action. There are 1 circuits on op amps. This op amp ic outputs Voltage signals, which is one of the many benefits it has.
MAX4081FASA+T Features
8 Pins
13.98dB voltage gain
Output Type: Voltage
MAX4081FASA+T Applications
There are a lot of Maxim Integrated MAX4081FASA+T Instrumentational OP Amps applications.
- Medical instruments
- Power transmission
- Radiation thermometry transducers
- Hand-held batteries
- High/low-pass filter circuit
- Navigation
- Television
- Scintillation detectors
- RF cable systems
- Home audio systems
