MAX4081TAUA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1993 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 362mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4081 |
| Pin Count | 8 |
| Output Type | Voltage |
| Supply Voltage-Max (Vsup) | 76V |
| Power Supplies | 4.5/76V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 103μA |
| Nominal Supply Current | 103μA |
| Adjustable Threshold | YES |
| Accuracy | 0.1 % |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~76V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 150 kHz |
| Gain Bandwidth Product | 150 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4081TAUA Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 48V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Power Management Circuits device. There are 8 pins on this chip. Op amp ic rates 100μV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 103μA and 10 . 26.02dB should remain the voltage gain. 1 channels are available on the instrumentation amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Voltage signals. An analog IC known as a POWER SUPPLY SUPPORT CIRCUIT is the other type of IC that is used in this op amp ic.
MAX4081TAUA Features
8 Pins
supply voltage of 48V
26.02dB voltage gain
Output Type: Voltage
MAX4081TAUA Applications
There are a lot of Maxim Integrated MAX4081TAUA Instrumentational OP Amps applications.
- pH (acidity)
- single/dual op amp sum and difference circuits
- Thermocouples
- Commercial audio systems
- Radiation thermometry transducers
- Integrator circuits
- Portable docking station
- Video data acquisition
- Weak signal detection
- RF cable systems
