Parameters |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX409 |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Circuits |
1 |
Operating Supply Current |
1μA |
Nominal Supply Current |
1.2mA |
Output Current |
600μA |
Slew Rate |
0.08V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
0.1pA |
Voltage - Supply, Single/Dual (±) |
2.5V~10V |
Output Current per Channel |
600μA |
Input Offset Voltage (Vos) |
25μV |
Gain Bandwidth Product |
150kHz |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
Unity Gain BW-Nom |
150 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.00002μA |
Low-Offset |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
250μV |
Low-Bias |
YES |
Micropower |
YES |
Height Seated (Max) |
4.572mm |
Length |
9.375mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
MAX409ACPA Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 2.5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In terms of input offset voltage, operational amplifier rates 25μV. This electrical part should be mounted using type Through Hole. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 1μA . 120dB should remain the voltage gain. There are 1 circuits on this op amp. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 5V.
MAX409ACPA Features
8 Pins
supply voltage of 2.5V
120dB voltage gain
Output Type: Rail-to-Rail
MAX409ACPA Applications
There are a lot of Maxim Integrated MAX409ACPA Instrumentational OP Amps applications.
- Micro signal measurement
- Portable electronic products powered by batteries
- earphone
- Information processing
- Automotive sensors
- High input resistance broadband
- Switching amplifier
- Image computer boards
- Computer workstations
- Inverse/same-phase proportional circuit