MAX409BCSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX409 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1.2mA |
| Output Current | 600μA |
| Slew Rate | 0.08V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~10V |
| Output Current per Channel | 600μA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 150 kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 150 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX409BCSA+ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 2.5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In terms of input offset voltage, operational amplifier rates 750μV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using a supply current of 1μA , this buffer op amp will be able to operate. Keeping the voltage gain at 120dB is the best course of action. On this buffer amplifier, there are 1 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5V.
MAX409BCSA+ Features
8 Pins
supply voltage of 2.5V
120dB voltage gain
Output Type: Rail-to-Rail
MAX409BCSA+ Applications
There are a lot of Maxim Integrated MAX409BCSA+ Instrumentational OP Amps applications.
- High speed sample
- Thermocouples
- Weak signal detection
- Television broadcasting equipment
- pH (acidity)
- Medical imaging
- Broadcasting
- Instrumentation
- Industrial applications including automation
- High/low-pass filter circuit
