MAX4105EUK-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4105 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Number of Circuits | 1 |
| Current - Supply | 20mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 32μA |
| Voltage - Supply, Single/Dual (±) | ±3.5V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 410000 kHz |
| Average Bias Current-Max (IIB) | 70μA |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=5 |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Current - Output / Channel | 70mA |
| -3db Bandwidth | 410MHz |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Wideband | YES |
| Voltage Gain-Min | 560 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4105EUK-T Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. This is a Voltage Feedback type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 5. There are a total of 5 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. In total, there are 1 circuits on this buffer amplifier. TAPE AND REEL is adopted to pack the instrumentation amplifier. To run supply current of buffer amplifier under 20mA. There are a maximum of 560 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.
MAX4105EUK-T Features
5 Pins
supply voltage of 5V
MAX4105EUK-T Applications
There are a lot of Maxim Integrated MAX4105EUK-T Instrumentational OP Amps applications.
- Computer workstations
- pH (acidity)
- Fast A/D and D/A converters
- E-book readers
- Comparator
- Test equipment
- Blood pressure sensors
- Car stereo
- Medical imaging
- High speed sample
