banner_page

MAX410CPA+

1 Channels 35mA per Channel 80nA 115 dB Instrumentational OP Amps 0.2μA 5.25V 4.8V~10.5V ±2.4V~5.25V MAX410 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX410CPA+
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 228
  • Description: 1 Channels 35mA per Channel 80nA 115 dB Instrumentational OP Amps 0.2μA 5.25V 4.8V~10.5V ±2.4V~5.25V MAX410 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MAX410
Pin Count 8
Operating Supply Voltage 5.25V
Number of Channels 1
Operating Supply Current 2.5mA
Nominal Supply Current 2.7mA
Output Current 35mA
Slew Rate 4.5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 115 dB
Current - Input Bias 80nA
Voltage - Supply, Single/Dual (±) 4.8V~10.5V ±2.4V~5.25V
Output Current per Channel 35mA
Input Offset Voltage (Vos) 120μV
Bandwidth 28MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 28000 kHz
Voltage Gain 122dB
Average Bias Current-Max (IIB) 0.2μA
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Dual Supply Voltage 5V
Height 4.45mm
Length 9.91mm
Width 7.87mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifiers
Technology BIPOLAR
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260

MAX410CPA+ Overview


It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifiers devices. 8 pins are located on the operational amplifiers. Op amp ic rates 120μV for input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. This op amp can operate from a supply current at 2.5mA. 122dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 5.25V.

MAX410CPA+ Features


8 Pins
supply voltage of 5V
122dB voltage gain

MAX410CPA+ Applications


There are a lot of Maxim Integrated MAX410CPA+ Instrumentational OP Amps applications.

  • Video computer boards
  • MP3
  • Band-stop filter
  • single/dual op amp sum and difference circuits
  • High input resistance broadband
  • Cinema or auditorium audio system
  • Video data acquisition
  • High gain DC amplifier
  • Car stereo
  • Radiation thermometry transducers

Write a review

Note: HTML is not translated!
    Bad           Good