MAX4122EUK-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 571mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4122 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.25V |
| Number of Channels | 1 |
| Operating Supply Current | 725μA |
| Nominal Supply Current | 650μA |
| Output Current | 50mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 67 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6.5V ±1.35V~3.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 106dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4122EUK-T Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. It consists of a total of 5 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 6.5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 5 pins that make up the linear amplifier. The input offset voltage is 350μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 725μA can be used to operate this linear amplifier. 106dB should be the voltage gain. Instrumentation amplifier has 1 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of instrumentation amplifier is rated 3.25V voltage. This linear amplifier pack is based on the TAPE AND REEL axis.
MAX4122EUK-T Features
5 Pins
supply voltage of 6.5V
106dB voltage gain
Output Type: Rail-to-Rail
MAX4122EUK-T Applications
There are a lot of Maxim Integrated MAX4122EUK-T Instrumentational OP Amps applications.
- Professional videography
- MP3
- Portable electronic products powered by batteries
- Logarithmic operation circuits
- Oscilloscopes
- Addition operation circuits
- Fast A/D and D/A converters
- Tablets
- Active probe
- Car stereo
