MAX4124EUK-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 571mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4124 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.25V |
| Number of Channels | 1 |
| Operating Supply Current | 725μA |
| Nominal Supply Current | 650μA |
| Output Current | 50mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 67 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6.5V ±1.35V~3.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 25MHz |
| Unity Gain BW-Nom | 25000 kHz |
| Voltage Gain | 106dB |
| Low-Offset | NO |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4124EUK-T Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. This linear amplifier should be powered by an 6.5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 5 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 350μV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 725μA , this buffer op amp will be able to operate. Maintain 106dB as the voltage gain. On the buffer amps, there are 1 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 3.25V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis.
MAX4124EUK-T Features
5 Pins
supply voltage of 6.5V
106dB voltage gain
Output Type: Rail-to-Rail
MAX4124EUK-T Applications
There are a lot of Maxim Integrated MAX4124EUK-T Instrumentational OP Amps applications.
- Comparator
- PDA
- Measurements of Wheatstone bridge
- Biopotential
- Band-pass filter
- Wireless base stations
- Multiplication circuits
- Power control
- Inverse/same-phase proportional circuit
- Power transmission
