MAX4128ESA+

2 Channels 50mA per Channel 50nA 74 dB Instrumentational OP Amps 0.16μA 3.25V 2.7V~6.5V ±1.35V~3.25V MAX4128 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4128ESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 589
Description: 2 Channels 50mA per Channel 50nA 74 dB Instrumentational OP Amps 0.16μA 3.25V 2.7V~6.5V ±1.35V~3.25V MAX4128 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	6.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4128
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3.25V
Number of Channels	2
Operating Supply Current	725μA
Nominal Supply Current	650μA
Output Current	50mA
Slew Rate	10V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	74 dB
Current - Input Bias	50nA
Voltage - Supply, Single/Dual (±)	2.7V~6.5V ±1.35V~3.25V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	250μV
Bandwidth	25MHz
Unity Gain BW-Nom	25000 kHz
Voltage Gain	106dB
Average Bias Current-Max (IIB)	0.16μA
Low-Offset	YES
Frequency Compensation	YES AVCL>=10
Supply Voltage Limit-Max	7.5V
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.15μA
Programmable Power	NO
Dual Supply Voltage	3V
Power	NO
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1998
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR

MAX4128ESA+ Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 6.5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 250μV voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 725μA. There should be no change in the voltage gain at 106dB. 2 channels are available on the instrumentation amplifier. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3.25V voltage.