Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX412 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
+-5V |
Number of Circuits |
2 |
Current - Supply |
2.5mA |
Slew Rate |
4.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
121 dB |
Current - Input Bias |
80nA |
Voltage - Supply, Single/Dual (±) |
4.8V~10.5V ±2.4V~5.25V |
Bandwidth |
28MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
28000 kHz |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
120μV |
Bias Current-Max (IIB) @25C |
0.15μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Voltage Gain-Min |
316000 |
Common-mode Reject Ratio-Min |
115 dB |
Length |
9.375mm |
RoHS Status |
ROHS3 Compliant |
MAX412CPA+ Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. For this electronic part, it is recommended that you mount it with type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. The buffer amp consists of 2 circuits in total. It is recommended that you use an 2.5mA power supply with this electrical part in order for it to operate correctly. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 316000.
MAX412CPA+ Features
8 Pins
supply voltage of 5V
MAX412CPA+ Applications
There are a lot of Maxim Integrated MAX412CPA+ Instrumentational OP Amps applications.
- Integrator circuits
- Television
- Medical instruments
- Digital cameras
- Signal filtering
- Large motor controllers
- Strain gauges
- Oscilloscopes
- Power transmission
- Logarithmic operation circuits