MAX414ESD

4 Channels 35mA per Channel 80nA 115 dB Instrumentational OP Amps 0.35μA 9V 4.8V~10.5V ±2.4V~5.25V MAX414 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX414ESD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 790
Description: 4 Channels 35mA per Channel 80nA 115 dB Instrumentational OP Amps 0.35μA 9V 4.8V~10.5V ±2.4V~5.25V MAX414 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX414
Pin Count	14
Operating Supply Voltage	9V
Power Supplies	+-5V
Number of Channels	4
Operating Supply Current	2.5mA
Nominal Supply Current	10.8mA
Max Supply Current	10.8mA
Slew Rate	4.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	115 dB
Current - Input Bias	80nA
Voltage - Supply, Single/Dual (±)	4.8V~10.5V ±2.4V~5.25V
Output Current per Channel	35mA
Input Offset Voltage (Vos)	150μV
Bandwidth	28MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	28000 kHz
Voltage Gain	122dB
Average Bias Current-Max (IIB)	0.35μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Settling Time	1.3 μs
Bias Current-Max (IIB) @25C	0.15μA
Height Seated (Max)	1.75mm
Length	8.65mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX414ESD Overview

It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tube case. We are approaching the 14h termination of the year. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 14 pins. In terms of input offset voltage, operational amplifier rates 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 2.5mA. It is recommended to keep the voltage gain at 122dB at all times. 4 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 9V.