MAX4162EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 312mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4162 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Output Current | 15mA |
| Slew Rate | 0.115V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 200 kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX4162EUK+T Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. The total number of pins on linear amplifier is 5. I would like to remind you that this buffer op amp should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 5 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using a supply current of 25μA , this buffer op amp will be able to operate. 120dB should be the voltage gain. The op amp ic has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 5V.
MAX4162EUK+T Features
5 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
MAX4162EUK+T Applications
There are a lot of Maxim Integrated MAX4162EUK+T Instrumentational OP Amps applications.
- Fission chambers
- Car stereo
- Image computer boards
- Commercial audio systems
- Information processing
- Weak signal detection
- PDA
- High/low-pass filter circuit
- Test equipment
- Gaming industry
