MAX4163ESA+

2 Channels 15mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 5V 2.7V~10V ±1.35V~5V MAX4163 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4163ESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 111
Description: 2 Channels 15mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 5V 2.7V~10V ±1.35V~5V MAX4163 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1997
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4163
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Channels	2
Operating Supply Current	25μA
Nominal Supply Current	25μA
Output Current	15mA
Slew Rate	0.115V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~10V ±1.35V~5V
Output Current per Channel	15mA
Input Offset Voltage (Vos)	500μV
Bandwidth	200 kHz
Unity Gain BW-Nom	200 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	11V
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Dual Supply Voltage	3V
Power	NO
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX4163ESA+ Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 500μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 25μA can be used to operate this linear amplifier. There should be no change in the voltage gain. Op amp ic has 2 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 5V voltage.