MAX4166ELA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Gold (Au) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4166 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.25V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 125mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6.5V ±1.35V~3.25V |
| Output Current per Channel | 125mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.225μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4166ELA+T Overview
A 8-WFDFN case is used to package the op amp. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifiers device, to be precise. The op amp ic has an array of 8 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 350μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 1.3mA . 120dB should be the voltage gain. A linear amplifier like this has 1 circuits on it. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 3.25V. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
MAX4166ELA+T Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MAX4166ELA+T Applications
There are a lot of Maxim Integrated MAX4166ELA+T Instrumentational OP Amps applications.
- Commercial audio systems
- Medical imaging
- Power generator
- Multiplication circuits
- Communication device
- Proportional operation circuits
- Test equipment
- Differentiator circuits
- Polarized electrodes
- Subtraction operation circuits
