MAX4172EUA+
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4172 |
| Pin Count | 8 |
| Output Voltage | 30.8V |
| Operating Supply Voltage | 12V |
| Supply Voltage-Max (Vsup) | 32V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Output Current | 1.75mA |
| Max Supply Current | 1.6mA |
| Adjustable Threshold | NO |
| Amplifier Type | Current Sense |
| Current - Input Bias | 50μA |
| Voltage - Supply, Single/Dual (±) | 3V~32V |
| Output Current per Channel | 1.75mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 800 kHz |
| Voltage - Input Offset | 2mV |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 330mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
MAX4172EUA+ Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. Op amps are Current Sense types of amplifier on the chip. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 12V battery. This particular linear amplifier is a type of Other Analog ICs device, to be precise. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 800μA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 12V voltage. The other types of analog IC are as follwed POWER SUPPLY SUPPORT CIRCUIT.
MAX4172EUA+ Features
8 Pins
supply voltage of 12V
MAX4172EUA+ Applications
There are a lot of Maxim Integrated MAX4172EUA+ Instrumentational OP Amps applications.
- Addition operation circuits
- Weighing systems
- Automation control systems
- Hand-held batteries
- Medical imaging
- Inverse/same-phase proportional circuit
- Displayers for aircraft and air transportation control systems
- Car stereo
- Tablets
- Biopotential
