MAX4211AEUE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4211 |
| Function | Current Monitor |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Voltage - Input | 4V~28V |
| Nominal Supply Current | 1.1mA |
| Adjustable Threshold | NO |
| Accuracy | ±0.5% |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 220 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 14μA |
| Number of Amplifiers | 2 |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4211AEUE Overview
Buck boost converter is embedded in the Tube package.Depending on how 16-TSSOP (0.173, 4.40mm Width) packages voltage regulator, voltage regulator will be packaged in the same way.Surface Mount is used to mount this current regulator on the board.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~85°C.As far as input voltage goes, current regulator supports the value of 4V~28V.Among the MAX4211 family of products.As part of a signal interface in a computer or other communication constant current regulator, 16 pins are pronged contacts.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.The number of channels is growing strong/weak: 1.A maximum supply voltage of 5.5V can be supported by it.Power Management Circuits, which is a part that contains all of these current regulations, is included in this part.With the minimal supply voltage of 2.7V, it is capable of operating.Current regulation operates from 3/5V power supplies.
MAX4211AEUE Features
Tube package
MAX4211 family
The maximal supply voltage of 5.5V
3/5V power supplies
MAX4211AEUE Applications
There are a lot of Maxim Integrated MAX4211AEUE Current Regulation/Managements applications.
- Over-current measurement
- DC motor control
- Suspension controls
- Over current monitor
- Power management
- Transmission controls
- Power supply current measurement
- Industrial applications current measurement
- Diesel injection controls
- DC-to-dc converters
