MAX4211DETE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4211 |
| Function | Current Monitor |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 1.1mA |
| Voltage - Input | 4V~28V |
| Nominal Supply Current | 670μA |
| Adjustable Threshold | NO |
| Accuracy | ±0.5% |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 220 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 3μA |
| Number of Amplifiers | 2 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MAX4211DETE Overview
In package Tube, buck boost converter is included.The package is in the form of 16-WQFN Exposed Pad.Mounted by Surface Mount, this current regulator is a semiconductor.Current regulator is recommended that the operating temperature not exceed -40°C~85°C.An input voltage wcurrent regulatorh a value of 4V~28V may be used as an input voltage.There are two types of MAX4211s in this family.In computers and other communications constant current regulators, 16 pins are pronged contacts that form part of a signal interface.It is mounted on a Surface Mount-axis by this current regulator.Providing the constant current is powered by a 5VV power source, the constant current should be able to function.This power converter uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The number of channels is growing strong/weak: 1.A maximum supply voltage of 5.5V can be supported by it.Power Management Circuits is a part that includes these current regulations, all of which are included in one part.A minimum supply voltage of 2.7V is required for its operation.This boost converter is supplied with an operating supply current of 1.1mA for its operation.Current regulation operates from 3/5V power supplies.
MAX4211DETE Features
Tube package
MAX4211 family
The maximal supply voltage of 5.5V
3/5V power supplies
MAX4211DETE Applications
There are a lot of Maxim Integrated MAX4211DETE Current Regulation/Managements applications.
- Automotive current measurement
- Power management
- Over current monitor
- Battery chargers
- Smart battery packs
- Current sensing
- Over-current protection
- Over current monitor
- Transmission controls
- Programmable current source
