MAX4211EEUE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4211 |
| Function | Current Monitor |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Voltage - Input | 4V~28V |
| Nominal Supply Current | 670μA |
| Adjustable Threshold | NO |
| Accuracy | ±0.5% |
| Min Input Voltage | 160mV |
| Common Mode Rejection Ratio | 80 dB |
| Max Input Voltage | 1.1V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 220 kHz |
| Supply Current-Max (Isup) | 1.1mA |
| Sensing Method | High-Side |
| Input Bias Current | 3μA |
| Number of Amplifiers | 2 |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4211EEUE Overview
Buck boost converter is embedded in the Tube package.In the same manner as 16-TSSOP (0.173, 4.40mm Width), voltage regulator is packaged.Current regulator is mounted by Surface Mount.The operating temperature should not exceed -40°C~85°C.Voltages of 4V~28V can be input as input voltages in this module.There are two types of MAX4211s in this family.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. There is a Surface Mount mounting bracket on the back of this current regulator.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.This power converter utiliPOWER SUPPLY SUPPORT CIRCUITes an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT.The number of channels is growing strong/weak: 1.The maximum voltage of 5.5V that can be supplied to the buck boost converter is supported.As a result, these current regulations are included in a part called Power Management Circuits, which consists of these current regulations.The buck boost converter operates with a minimum supply voltage of 2.7V.It reaches 1.1mA when the maximum supply current (Isup) is supplied to it for current regulation's operation.Power is provided by 3/5V power supplies.Due to its maximal input voltage, 1.1V provides maximum design power converter flexibility.Due to the minimal input voltage of 160mV, it offers maximum design flexibility.
MAX4211EEUE Features
Tube package
MAX4211 family
The maximal supply voltage of 5.5V
3/5V power supplies
MAX4211EEUE Applications
There are a lot of Maxim Integrated MAX4211EEUE Current Regulation/Managements applications.
- Engine management
- DC-to-dc converters
- Power management
- Over current monitor
- Over-current measurement
- Suspension controls
- Industrial applications current measurement
- Programmable current source
- Over-current protection
- Battery chargers
