MAX4211FETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4211 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 1.1mA |
| Voltage - Input | 4V~28V |
| Nominal Supply Current | 670μA |
| Adjustable Threshold | NO |
| Accuracy | ±0.5% |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 220 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 3μA |
| Number of Amplifiers | 2 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4211FETE+ Overview
Buck boost converter is embedded in the Tube package.16-WQFN Exposed Pad has packaged voltage regulator in this manner.Surface Mount mounts this current regulator.The operating temperature should not exceed -40°C~85°C.Current regulator is possible to use a voltage input of 4V~28V for the input.In the MAX4211 family, current regulator is a member.When a computer or other communication constant current regulator has 16 pins, these are pronged contacts.Surface Mount is responsible for mounting this current regulator.The supply voltage of this electrical constant current is 5V.POWER SUPPLY SUPPORT CIRCUIT is the analog IC in this power converter.There is a strong/weak growth in the number of channels: 1.The maximum voltage of 5.5V that can be supplied to the buck boost converter is supported.In this case, these current regulations are included as part of a part called Power Management Circuits.As a result, it operates at the minimal supply voltage of 2.7V.In order for it to operate, it requires an operating supply current of 1.1mA.The system is powered by 3/5V power supplies.
MAX4211FETE+ Features
Tube package
MAX4211 family
The maximal supply voltage of 5.5V
3/5V power supplies
MAX4211FETE+ Applications
There are a lot of Maxim Integrated MAX4211FETE+ Current Regulation/Managements applications.
- Motor controls
- Over current monitor
- Engine management
- Transmission controls
- DC-to-dc converters
- Level translating
- Smart battery packs
- Battery management
- Over current monitor
- Over-current measurement
