MAX4215EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 330mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4215 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Power Supplies | 3.3/5/+-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.5mA |
| Supply Current-Max | 7mA |
| Slew Rate | 600V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 5.4μA |
| Voltage - Supply, Single/Dual (±) | 3.15V~11V ±1.575V~5.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 4mV |
| Voltage Gain | 6.02dB |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| -3db Bandwidth | 230MHz |
| Output Current-Min | 0.06A |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4215EUA+T Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Buffer-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 4mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 5.5mA can be used to operate this linear amplifier. Voltage gain should remain at 6.02dB. This op amp ic has 1 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 9V voltage.
MAX4215EUA+T Features
8 Pins
supply voltage of 5V
6.02dB voltage gain
Output Type: Rail-to-Rail
MAX4215EUA+T Applications
There are a lot of Maxim Integrated MAX4215EUA+T Instrumentational OP Amps applications.
- Mobile phone
- Automatic control
- Communication
- Displayers for aircraft and air transportation control systems
- E-book readers
- Differentiator circuits
- Active probe
- pH (acidity)
- High input resistance broadband
- Exponential operation circuits
