MAX4219ESD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 667mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4219 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Channels | 3 |
| Operating Supply Current | 5.5mA |
| Output Current | 120mA |
| Supply Current-Max | 21mA |
| Slew Rate | 600V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 5.4μA |
| Voltage - Supply, Single/Dual (±) | 3.15V~11V ±1.575V~5.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 4mV |
| Voltage Gain | 6.02dB |
| Average Bias Current-Max (IIB) | 12μA |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Supply Voltage Limit-Max | 12V |
| -3db Bandwidth | 200MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
MAX4219ESD Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Buffer-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. The buffer op amp includes 14 pins. As far as the input offset voltage is concerned, linear amplifier rates at 4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Operational amplifier can operate supply current at 5.5mA. Maintain 6.02dB as the voltage gain. 3 channels are available on the instrumentation amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 9V.
MAX4219ESD Features
14 Pins
supply voltage of 5V
6.02dB voltage gain
Output Type: Rail-to-Rail
MAX4219ESD Applications
There are a lot of Maxim Integrated MAX4219ESD Instrumentational OP Amps applications.
- Thermocouples
- Cinema or auditorium audio system
- Communication device
- Proportional counter tubes
- Weak signal detection
- Scintillation detectors
- Exponential operation circuits
- Oscilloscopes
- Displayers for aircraft and air transportation control systems
- Signal filtering
