MAX4231AXT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4231 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 1.2mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.5V |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Average Bias Current-Max (IIB) | 0.00055μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 850μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Power | NO |
| Voltage Gain-Min | 2240 |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
MAX4231AXT+T Overview
In the package, you will find a 6-TSSOP, SC-88, SOT-363-case to contain the op amp ic. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 6. It consists of a total of 6 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 6 pins are available on the instrumentation amplifier. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. During the manufacturing process, this buffer amplifier is divided into 1 circuits. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. A supply of 1.2mA or higher is recommended for use with this electronic part. To conduct electronic part voltage gain higher than 2240.
MAX4231AXT+T Features
6 Pins
supply voltage of 2.7V
Output Type: Rail-to-Rail
MAX4231AXT+T Applications
There are a lot of Maxim Integrated MAX4231AXT+T Instrumentational OP Amps applications.
- Laptop
- Subtraction operation circuits
- Power control
- Medical instruments
- Video computer boards
- High speed sample
- Cinema or auditorium audio system
- Communication
- Ultrasound transducers
- High-frequency data acquisition systems
