MAX4232AUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4232 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Current - Supply | 1.2mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.5V |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 850μV |
| Current - Output / Channel | 200mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4232AUA+ Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 2.7V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. On this buffer amplifier, there are 2 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. It is recommended that you use an 1.2mA power supply with this electrical part in order for it to operate correctly.
MAX4232AUA+ Features
8 Pins
supply voltage of 2.7V
Output Type: Rail-to-Rail
MAX4232AUA+ Applications
There are a lot of Maxim Integrated MAX4232AUA+ Instrumentational OP Amps applications.
- Weighing systems
- Comparator
- single/dual op amp sum and difference circuits
- Television broadcasting equipment
- Car stereo
- Communication device
- Exponential operation circuits
- Scintillation detectors
- Signal filtering
- Fast A/D and D/A converters
