MAX4234ASD+

4 Channels 200mA per Channel 50pA 52 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.5V MAX4234 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4234ASD+
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 589
Description: 4 Channels 200mA per Channel 50pA 52 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.5V MAX4234 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.7V
Terminal Pitch	1.27mm
Base Part Number	MAX4234
Pin Count	14
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	4
Operating Supply Current	1.2mA
Nominal Supply Current	1.1mA
Output Current	200mA
Slew Rate	10V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	52 dB
Current - Input Bias	50pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.5V
Output Current per Channel	200mA
Input Offset Voltage (Vos)	850μV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	100dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Power	NO
Height	1.5mm
Length	8.75mm
Width	4mm
Radiation Hardening	No

MAX4234ASD+ Overview

It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. The number of terminations is approaching the 14 mark. The pins on this board total to 14 in total. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 850μV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 1.2mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 100dB at all times. Instrumentation amplifier has 4 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.