MAX4237BESA+
| Parameters | |
|---|---|
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 350μA |
| Slew Rate | 1.3 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 84 dB |
| Output Current per Channel | 30mA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 7.5MHz |
| Unity Gain BW-Nom | 7500 kHz |
| Voltage Gain | 128dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 97dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Bias Current | 1pA |
| Wideband | NO |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lifecycle Status | OBSOLETE (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 471mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
MAX4237BESA+ Overview
Packaging for the buffer amplifier is in the form of a SOIC case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. A total of 8 pins are located on this board. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 5μV. You can run this op amp ic on 350μA . Maintain 128dB as the voltage gain. Instrumentation amplifier has 1 channels on it. This instrumentation amplifier cannot operate below -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5V, and this is an excellent feature. As a general rule, it is advisable to keep the op amp's supply voltage above 2.4V at all times.
MAX4237BESA+ Features
8 Pins
supply voltage of 5V
128dB voltage gain
MAX4237BESA+ Applications
There are a lot of Maxim Integrated MAX4237BESA+ Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- pH (acidity)
- Signal operation
- Addition operation circuits
- Measurements of Wheatstone bridge
- Proportional counter tubes
- Radar
- Medical imaging
- Signal transformation
- Precision measurement
