MAX4238AUT-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Packaging | Cut Tape |
| Published | 2006 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 727mW |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 850μA |
| Frequency (Max) | 1kHz |
| Slew Rate | 0.35 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1pA |
| Output Current per Channel | 40mA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 100nV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 150dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Voltage Noise Density | 30nV/sqrt Hz |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
MAX4238AUT-T Overview
In order to protect the op amps, a SOT-23-6 case is used. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. There is a Cut Tape case that is delivered with the instrumentation amplifiers. We are approaching the 6h termination of the year. In total, there are 6 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 6 pins on this chip. Op amp ic rates 100nV for input offset voltage. Operational amplifier can operate supply current at 600μA. Maintain 150dB as the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. To operate this buffer amplifier, the temperature must not be lower than -40°C. It should only be used at temperatures up above 125°C. The operating supply voltage of instrumentation amplifier is rated 5V voltage. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times.
MAX4238AUT-T Features
6 Pins
supply voltage of 5V
150dB voltage gain
MAX4238AUT-T Applications
There are a lot of Maxim Integrated MAX4238AUT-T Instrumentational OP Amps applications.
- Oscilloscopes
- Car stereo
- Strain gauges
- Computer workstations
- High-frequency data acquisition systems
- Weighing systems
- Home audio systems
- Portable electronic products powered by batteries
- Medical instruments
- Television
