MAX4240EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4240 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 14μA |
| Slew Rate | 0.04V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.5V |
| Bandwidth | 90 kHz |
| Unity Gain BW-Nom | 90 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 3V |
| Voltage - Input Offset | 250μV |
| Current - Output / Channel | 2.5mA |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.006μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -3V |
| Power | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4240EUK+T Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. The pins on this board total to 5 in total. The linear amplifier should be run at 5.5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 5 pins are located on the operational amplifiers. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . This op amp ic has 1 circuits. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. In order to ensure optimal performance, an 14μA supply is recommended for this electrical component. Beyond-the-Rails? corresponds to linear amplifier's series.
MAX4240EUK+T Features
5 Pins
supply voltage of 5.5V
Output Type: Rail-to-Rail
MAX4240EUK+T Applications
There are a lot of Maxim Integrated MAX4240EUK+T Instrumentational OP Amps applications.
- Medical instruments
- Portable electronic products powered by batteries
- Power generator
- Weak signal detection
- Weighing systems
- Multiplication circuits
- High/low-pass filter circuit
- Non-polarized electrodes
- Power transmission
- Active probe
