MAX4241ESA+

1 Channels 2.5mA per Channel 2nA 74 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.5V MAX4241 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4241ESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 799
Description: 1 Channels 2.5mA per Channel 2nA 74 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.5V MAX4241 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1998
Series	Beyond-the-Rails™
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4241
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Channels	1
Operating Supply Current	14μA
Nominal Supply Current	10μA
Output Current	2.5mA
Slew Rate	0.04V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	74 dB
Current - Input Bias	2nA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.5V
Output Current per Channel	2.5mA
Input Offset Voltage (Vos)	200μV
Bandwidth	90 kHz
Unity Gain BW-Nom	90 kHz
Voltage Gain	94dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	3V
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.006μA
Programmable Power	NO
Power	NO
Length	4.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

MAX4241ESA+ Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5.5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. Op amp rates 200μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 14μA . 94dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 2.75V. As the name implies, Beyond-the-Rails? refers to the series of the buffer op amp.