MAX4245AXT-T
| Parameters | |
|---|---|
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height | 1mm |
| Length | 2.15mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4245 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Number of Circuits | 1 |
| Operating Supply Current | 375μA |
| Nominal Supply Current | 320μA |
| Output Current | 30mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
MAX4245AXT-T Overview
Packaging for the buffer amplifier is in the form of a 6-TSSOP, SC-88, SOT-363 case. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. A total of 6 terminations have been reported in the past few weeks. It consists of a total of 6 pins in total. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 6 pins. As far as the input offset voltage is concerned, linear amplifier rates at 400μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 375μA. Op amp is a member of the 120dB's 120dB family. A linear amplifier like this has 1 circuits on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
MAX4245AXT-T Features
6 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
MAX4245AXT-T Applications
There are a lot of Maxim Integrated MAX4245AXT-T Instrumentational OP Amps applications.
- Industrial control system
- Medical imaging
- RF cable systems
- Blood pressure sensors
- Displayers for aircraft and air transportation control systems
- Hand-held batteries
- Weighing systems
- Subtraction operation circuits
- Multiplication circuits
- Non-polarized electrodes
